| Kit contains: 1 optical screwdriver, 1 screw starter, 1 magnifier, 2 metric hinge screws (1.6 mm and 1.4 mm), 2 American standard hinge screws (7 barrel and 5 barrel), 1 case. Printed on Recyclable Paper. 4 hinge screw sizes to fit most frames. | |
| 1. Gently twist magnifier onto handle. 2. Select the screw diameter that appears to be the correct size. Insert screwdriver tip into screw-starter and hinge screw into other end as shown on package. 3. Make sure leaves of the hinge are properly engaged as shown on package. Insert screw and tighten. Do not force. If screw does not tighten easily, then try a different screw. Most frames made in U.S.A. require 5 or 7 barrel hinge screws. Most imported frames use 1.4 mm or 1.6 mm metric hinge screws. There is 1 of each in the screwdriver handle. | |